Gradall Forklift Part

Gradall Forklift Parts - All through the time when WWII created a shortage of laborers, the well-known Gradall excavator was founded in the 1940s as the creation of two brothers Koop and Ray Ferwerda. The brothers faced the problems of a depleted workforce due to the war. As partners in their Cleveland, Ohio construction business referred to as Ferwerda-Werba-Ferwerda they lacked the available laborers in order to carry out the delicate work of grading and finishing on their freeway projects. The Ferwerda brothers decided to make an equipment which would save their company by making the slope grading job easier, more efficient and less manual.

The very first excavator prototype consisted of a machine with two industrial beams on a rotating platform fixed to a used truck. There was a telescopic cylinder that was used to move the beams backward and forward. This enabled the fixed blade at the far end of the beams to push or pull the dirt. Soon improving the very first design, the brothers made a triangular boom to add more strength. As well, they added a tilt cylinder that let the boom rotate 45 degrees in either direction. A cylinder was positioned at the back of the boom, powering a long push rod to enable the machinery to be outfitted with either a blade or a bucket attachment.

Gradall launched in 1992, with the introduction of the new XL Series hydraulics, the most ground-breaking adjustment in their machines ever since their creation. This new system of top-of-the-line hydraulics enabled the Gradall excavator to provide high productivity and comparable power to the more traditional excavators. The XL Series ended the initial Gradall equipment power drawn from low pressure hydraulics and gear pumps. These conventional systems successfully handled finishing work and grading but had a hard time competing for high productivity tasks.

Gradall's new XL Series excavators showed more ability to dig and lift materials. With this series, the models were produced with a piston pump, high-pressure system of hydraulics that showed distinct improvement in boom and bucket breakout forces. The XL Series hydraulics system was also developed along with a load-sensing capability. Traditional excavators make use of an operator to choose a working-mode; where the Gradall system could automatically adjust the hydraulic power intended for the work at hand. This makes the operator's overall work easier and also saves fuel at the same time.

When their XL Series hydraulics came onto the market, Gradall was basically thrust into the highly competitive market of machines meant to tackle excavation, demolition, pavement removal and various industrial tasks. Marketability was further improved with their telescoping boom due to its exclusive ability to work in low overhead areas and to better position attachments.

Click to Download the pdf

Forklift Parts

Transmissions for Forklift

Forklift Transmission - A transmission or gearbox makes use of gear ratios to supply torque and speed conversions from one rotating power source to another. "Transmission" means the entire drive train which consists of, prop shaft, gearbox, clutch, differential and final drive shafts. Transmissions are most normally utilized in motor vehicles. The transmission alters the productivity of the internal combustion...

More

---

Truss Jib

Truss Jib - A truss jib is actually used to be able to pick up and position trusses. It is actually an extended jib attachment that is equipped with a pyramid or triangular shaped frame. Usually, truss jibs are mounted on machines like for instance a skid steer loader, a compact telehandler or even a forklift using a quick-coupler accessory....

More

---

Axle Tech Part

Axle Tech Parts - The company of AxleTech International is a large supplier of specialty vehicle drive-train systems and components together with off highway vehicles. They take great pride in being a preferred supplier to their customer base. AxleTech strives to meet and exceed their customers' expectations for quality, service, technology and delivery. They believe in working within an environment...

More

---

Fuel Tank for Forklift

Forklift Fuel Tank - The majority of fuel tanks are fabricated; nonetheless several fuel tanks are fabricated by skilled craftsmen. Restored tanks or custom tanks can be seen on motorcycles, aircraft, automotive and tractors. When constructing fuel tanks, there are a series of requirements that must be followed. Primarily, the tanks craftsman would create a mockup to be able to...

More

---

Carton Clamp Attachment

Carton Clamp Attachments - The Carton Clamp is one of the more adaptable forklift attachments, utilized to handle various unsecured things on a pallet like furniture, canned goods, frozen cartons or appliances. Large rubber pads gently squeeze both sides of the load, gently carrying it up to transfer it to its next place. Carton Clamps were specifically designed to be...

More

---

Truss Booms

Truss Boom - A truss boom is utilized in order to lift and place trusses. It is an extended boom additional part that is equipped together with a triangular or pyramid shaped frame. Typically, truss booms are mounted on machines like for instance a compact telehandler, a skid steer loader or a forklift using a quick-coupler attachment. Older models of...

More

---

Forklift Control Valve

Forklift Control Valve - The earliest mechanized control systems were being utilized more that two thousand years ago. In Alexandria Egypt, the ancient Ktesibios water clock constructed in the third century is thought to be the first feedback control device on record. This clock kept time by way of regulating the water level inside a vessel and the water flow...

More

---

Simultaneous Fork Positioner

Simultaneous Fork Positioner - Forklift Truck Load Protectors eliminate pricey scuffing, chipping, scratching and marring by means of providing a cushioned non-slip surface between load and steel tine. These accessories are molded from premium polyurethane according to OEM specifications. It is very fast to set up the Load Protectors as they fit right above the typical forklift forks with mounting...

More

---